2015.
Берем диск от 1320, и там в каталоге DOS читаем инструкцию
| Цитата |
|---|
Readme
Changing Printer's Symbol Settings
If your printer's symbol setting was not automatically or correctly set during installation, you can set the symbol setting manually. Place the HP LaserJet 1150/1300 CD in the CD-ROM drive and from a DOS prompt type: copy /b x:\SYMSET\ukrainesym.pjl LPT1 (where x is your CD-ROM drive, PC866UKR (Ukraine) is the desired symbol set and LPT1 is the port where your printer is connected).
In each symbol set file, we tried to select the most common symbol set. If the wrong one is selected, you can modify the selection by substituting the code after the = sign. See the example below:
Original file is listed below:
%-12345X@PJL
@PJL DEFAULT LPARM:PCL SYMSET= PC8GRK
@PJL COMMENT PC851GRK
@PJL COMMENT ISOGRK
@PJL COMMENT GREEK8
%-12345X
To modify the symbol set from PC8GRK to GREEK8, replace the desired code found after the @PJL COMMENT remark behind the PCL SYMSET= . See the example below:
%-12345X@PJL
@PJL DEFAULT LPARM:PCL SYMSET= GREEK8
%-12345X
NOTE: The "" (box character) must be replaced with the "escape" character, also known as ASCII 027 or ASCII 27. This character can be generated in the DOS editor called "edit" by following this example:
- click on Start, Programs, Command Prompt.
- type "edit" (without the quotes) at the C:\> prompt, then press the Enter key.
- press [ Ctrl ] and [ p ] keys simultaneously, followed by the [ Ctrl ] and [ [ ] (the left bracket "[") keys simultaneously. A left-pointing arrow should appear on the screen, this is the "escape" character.
- type the rest of the command that you want, such as:
%-12345X@PJL @PJL DEFAULT ORIENTATION=LANDSCAPE
%-12345X@PJL
NOTE: Once again, the "" (box character) above must be replaced with the "escape" character.
Save the file you created (example: greek8sym.pjl) on your PC hard drive. Copy the file to your printer - from a DOS prompt, type: copy /b x:\greek8sym.pjl LPT1 (where x is your hard drive, and LPT1 is the port where your printer is connected). |
Т.Е. подключаем любыми средствами его как LPT
И делаем команду
copy /b cyrillicsym.pjl lpt1
cyrillicsym.pjl имеет следующее содержание
| Код |
|---|
%-12345X@PJL
@PJL DEFAULT LPARM:PCL SYMSET= PC866CYR
@PJL COMMENT ISOCYR
%-12345X |
